Auto Ladle Automatic Ladling machine

Auto Ladle Automatic Ladling machine

Feature

1. With five linkages, twin gear driven to enhance arm speed and stability, it also increase production output.
2. The case is mono-block; it greatly increases the precision of machine.
3. The ladle arm forward/return and pouring/scooping are controlled separately by inverters, thereby increasing the ladle speed, easy to operate.
4. The linkage model allows the arm to stop smoothly even at high speed. Preventing the molten aluminum from easily spilling.
5. The electrical components are controlled by PLC, using simple touch for setting, with build-in error code display for easier maintenance.
6. Main partsand electrical components adopt the imported parts (such as NSK bearing, KOYO encoder and CPG reducer etc,).
7. It is driven by the five-bar linkage and worm and gear, and regulated by frequency converter, which Is controlled by the Imported PLC and frequency converter.
8. The man-machine interface touch screen in Chinese language is adopted to conveniently set various parameters and conduct real-time monitoring over the machine status. Also, fault self-diagnosis display function is provided.
9. The driving parts adopt the imported bearingsand self-lubricating bearings to improve the performance stability.
10. With the probe broken-wire alarm function.
11. The feeding volume is controlled by the imported encoder for easy adjustment and digital control. The feeding volume can be increased or decreased at manual/outomatic state stably.
12. It can work singly and can become a full-automatic equipment through wiring with the die casting machine sprayer and extractor.
13. It has many standby modes. There are two operation modes of manual/automatic, three standby modes of front standby, rear standby and linkage control.